Pulling stations

Pulling stations for manure handling systems in cattle housings

How can we help you?

RPS
WPS-650

Pulling station WPS 650 / 1200 / 1600

WPS flexible pulling stations for the farmer with smaller or larger animal housings

WPS from LJM – Lind Jensen Agri is available in 3 different sizes.

WPS 650 is designed for the farmer who has smaller dung passages, the pulling station can handle lengths up to 70 m.

WPS 1200 is designed for the farmer who has medium-range dung passage lengths, the pulling station can handle lengths up to 130 m.

WPS 1600 is designed for the farmer who has long range dung passages, the pulling station can handle lengths up to 245 m.

With our WPS, we also offer other combination options for your animal housings and we can always assist you with advice so you get the right setup for your animal housing.

WPS 650 3 m / min. 0,55 kW Ø 615 mm. 70 m. Wire
WPS 1200 3 m / min. 0,55 kW Ø 1200 mm. 130 m. Wire
WPS 1600 4 m / min. 1,1 kW Ø 1600 mm. 245 m. Wire
RPS

Pulling station RPS

LJM’s RPS pulling station is for the farmer who needs a flexible, simple and durable solution.

The pulling station can be used for both new construction or modification of existing animal housing.

With an RPS pulling station, you are ensured a well-managed control that is freely programmable. You are also guaranteed full freedom, as well as a facility that is adapted to the type of animal housing and the length of the dung passage.

RPS 4 3-4 m / min. 0,55 kW Ø 273 mm. 140 m. Tov/Taifun wire
CPS-rød-min

Pulling station CPS

Pulling station with chain – the tested solution with over 1000 installations. New and optimized design

The pulling station can be used for both new construction or modification of existing animal housing.

With a CPS pulling station, you are ensured a well-managed control that is programmable. You are guaranteed full freedom, as well as a facility that is adapted to the type of animal housing and the length of the dung passages.

Can be used for solid floors.

CPS 4 4 m / min. 0,75 kW 100 m. Kæde
WAP-min

Pulling station WAP

The WAP 2 pulling station is a flexible solution especially suitable for unequal number of dung passages.

The pulling station is reliable and suitable for animal housings with an unequal number of dung passages. The pulling station is used for floors with slats or for solid floors. The pulling station can be used for both above and below slats.

WAP 2 is equipped with a 0.37 kW motor and runs at a speed of approx. 2 m. / min.

WAP 2 2 m / min. 0,37 kW Ø 114 mm. 80 m. Tov
PSW4-min

Pulling station PSW

Wall mounted compact pulling station, with flexible installation options.

Can be used over slats, solid floors – or under slats.

Can Draw up to 4 dung passages depending on lengths with an ”endless” taifun wire.

The PSW 4 is designed with a 0.55 kW engine and has a speed at approx. 4.5 m. / min.

PSW 4 is easy to install in both new and existing animal housings.
PLC control enables the choice of pausing and operating times.

PSW 4 3-4 m / min. 0,55 kW Ø 178 mm. 70 m. Taifun Wire